HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 85
Position the computer right-side up, with the front toward you., Remove the system board - sim card slot
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
l. Remove the system board shield (see System board shield on page 66) m. Remove the smart card reader (see Smart card reader on page 74) When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Remove the SIM (see SIM on page 45) ● Remove the memory modules (see Primary memory module on page 43 and Secondary memory module on page 56) ● Remove the WLAN module (see WLAN module on page 48) ● Remove the WWAN module (see WWAN module on page 51) ● Remove the modem module (see Modem module on page 67) ● Remove the heat sink (see Fan/heat sink assembly on page 78) Remove the system board: 1. Position the computer right-side up, with the front toward you. 2. Remove the ExpressCard or ExpressCard slot holder. 3. Peel back the adhesive strip (2) on the system board to reveal one of the two screws required to remove the system board. 4. Remove the two Phillips M2.0×4.0 screws (2) that secure the system board to the base enclosure. Component replacement procedures 77