HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 78
Latch assembly, The latch mechanism includes a small spring. Note the location of the spring.
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Reverse this procedure to reassemble and install the Bluetooth module. Latch assembly NOTE: The Latch Kit includes the latch, bracket, two screws, and spring. Description Latch Kit Spare part number 597837-001 Before removing the latch assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Remove the battery (see Battery on page 41) b. Remove the service access cover (see Service access cover on page 42) c. Remove the WLAN module (see WLAN module on page 48) d. Remove the WWAN module (see WWAN module on page 51) e. Remove the keyboard (see Keyboard on page 53) f. Remove the top cover (see Top cover on page 57) g. Remove the display assembly (see Display assembly on page 63) NOTE: The latch mechanism includes a small spring. Note the location of the spring. Remove the latch assembly: 1. Position the computer right-side up, with the front toward you. 2. Detach the spring (1) from the latch. 3. Remove the two Phillips M2.0×4.0 screws (2) that secure the latch bracket to the base enclosure. 70 Chapter 4 Removal and replacement procedures