HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 73

CAUTION, that secure the display bracket to the base

Get HP EliteBook 2760p PDF manuals and user guides View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

8. Disconnect the display cable (3) from the system board. CAUTION: Support the display assembly when removing the display screws in the following step. Failure to support the display assembly can result in damage to the assembly and other components. 9. Remove the two Phillips M2.5x6.0 screws (1) that secure the display assembly to the base enclosure. 10. Gently rotate the display (2) and swivel it at a 90-degree angle to gain access to the remaining screws in the display bracket. 11. Remove the two Phillips M2.5 x 6.0 screws (3) that secure the display bracket to the base enclosure. Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
8.
Disconnect the display cable
(3)
from the system board.
CAUTION:
Support the display assembly when removing the display screws in the following
step. Failure to support the display assembly can result in damage to the assembly and other
components.
9.
Remove the two Phillips M2.5x6.0 screws
(1)
that secure the display assembly to the base
enclosure.
10.
Gently rotate the display
(2)
and swivel it at a 90-degree angle to gain access to the remaining
screws in the display bracket.
11.
Remove the two Phillips M2.5 x 6.0 screws
(3)
that secure the display bracket to the base
enclosure.
Component replacement procedures
65