HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 75
Modem module, for more Cable Kit spare part number information.
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Remove the system board shield: 1. Position the computer right-side up, with the front toward you. 2. Remove the four Phillips M2.5×3.0 screws (1) and (2) that secure the shield to the base enclosure. 3. Slide the shield from the computer (3). WARNING! Use caution when handling the system shield as the object may be hot. Reverse this procedure to install the system board shield. NOTE: When installing a replacement system board shield, take care that the tab labeled "Watch Out" is inserted correctly under the heat sink so that the keyboard lies flat when replaced. Modem module NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 649758-001. See Cable Kit on page 24 for more Cable Kit spare part number information. Description Modem module Spare part number 628824-001 Before removing the modem module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 67