HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 74

System board shield, Remove the service access cover see - base system device

Get HP EliteBook 2760p PDF manuals and user guides View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

12. Lift the display straight up to remove it from the base enclosure (4). Reverse this procedure to reassemble and install the display assembly. System board shield Description System board shield Spare part number 649760-001 Before removing the system board shield, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Remove the battery (see Battery on page 41) b. Remove the service access cover (see Service access cover on page 42) c. Remove the WLAN module (see WLAN module on page 48) d. Remove the WWAN module (see WWAN module on page 51) e. Remove the keyboard (see Keyboard on page 53) f. Remove the top cover (see Top cover on page 57) g. Remove the display assembly (see Display assembly on page 63) 66 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
12.
Lift the display straight up to remove it from the base enclosure
(4)
.
Reverse this procedure to reassemble and install the display assembly.
System board shield
Description
Spare part number
System board shield
649760-001
Before removing the system board shield, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Remove the battery (see
Battery
on page
41
)
b.
Remove the service access cover (see
Service access cover
on page
42
)
c.
Remove the WLAN module (see
WLAN module
on page
48
)
d.
Remove the WWAN module (see
WWAN module
on page
51
)
e.
Remove the keyboard (see
Keyboard
on page
53
)
f.
Remove the top cover (see
Top cover
on page
57
)
g.
Remove the display assembly (see
Display assembly
on page
63
)
66
Chapter 4
Removal and replacement procedures