HP Integrity Superdome SX1000 Site Preparation Guide, Fifth Edition - HP Integ - Page 89
Computer Room Layout Plan, Step 1.
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Templates Computer Room Layout Plan Computer Room Layout Plan Use the following procedure to create a computer room layout plan: Step 1. Remove several copies of the floor plan grid. Step 2. Cut and join them together (as necessary) to create a scale model floor plan of your computer room. Step 3. Remove a copy of each applicable equipment footprint template. Step 4. Cut out each template selected in Step 3; then place it on the floor plan grid created in Step 2. Step 5. Position pieces until the desired layout is obtained; then fasten the pieces to the grid. Mark locations of computer room doors, air-conditioning floor vents, utility outlets, and so on. NOTE Attach a reduced copy of the completed floor plan to the site survey located in Chapter 4, "Pre-installation Survey." Hewlett-Packard field engineers use this floor plan during equipment installation. Appendix A 81