HP Neoware c50 TeemTalk® 5.0 for Windows CE & XPe User's Guide - Page 382

Host Command Summary ANSI VT510 Emulation When running the VT510 emulation, the following commands will be executed in addition those listed for ANSI VT100 and VT500. USER-DEFINED KEYS Download definitions for user-defined keys DCS *c ; *l ; *m | D...D ST *c 0 or none Clear all keys before loading new values (0 is default). 1 Load new UDK values; clear old values only when redefined. *l 0 or none Lock the keys. 1 Do not lock the keys against future redefinition. *m 0, 2 or none 1 3 4 Defines the shifted function key. Defines the unshifted function key. Defines the alternate unshifted function key. Defines the alternate shifted function key. | (vertical bar) The final character. Key definition strings follow and these are terminated by ST. D...D are the key definition strings in the following format: Key1/UDS/UDS Direction;Key2/UDS/UDS Direction;........; Key# Is the key selection number of the key to be defined as listed below: F1 11 F2 12 F3 13 F4 14 F5 15 F6 17 F7 18 F8 19 F9 20 F10 21 F11 23 F12 24 / Is a delimiter. UDS Is the user-defined string consisting of hex pairs in the following ranges: 3/0 through 3/9 (0 through 9) 4/1 through 4/6 (A through F) 6/1 through 6/6 (a through f) For example, the hex encoding for "PRINT" would be as follows: 5 0 5 2 4 9 4 E 5 4 This enables you to use any of the 256 character codes in the key string. You can enter key definition strings in any order. UDS Direction Specifies the transmission direction: 0 or none 1 2 Normal (Host and/or terminal) default Local (Terminal only) Remote (Host only) C-12