HP Neoware c50 TeemTalk® 5.0 for Windows CE & XPe User's Guide - Page 48

Getting Started CE - Direct Print Data To The Print Manager The Current System Printer Driver box displays the name of the currently selected system printer when both the Use Network Printer (LPR) and Print Direct To Port options are not selected. Clicking the Configure button will display a Print Manager dialog box which enables you to specify printer settings. If you find a through print results in data being split into lines, each treated as a separate print job, specify a time in the Seconds Close Delay box (e.g. 5 seconds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely. When set to 0, printing will not start until a 'print end of job' command is received from the host. Entering any other number will cause printing to start after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. If you require the port to be kept open all the time (to stop the printer resetting) enter -1 (minus one). XPe - Direct Print Data To The Print Manager The Printer list box lists the printers handled by the Print Manager. You can select from this list when the Use Network Printer (LPR) option is not selected. Clicking the Advanced button will display the standard Print Manager dialog box which enables you to specify printer settings. The Microsoft Windows Print Manager normally controls all print formatting, translates host characters to supported printer characters, and also provides a spooling facility. A disadvantage of using the Print Manager is that any print formatting escape sequences received from the host are stripped. If you want to use the Print Manager but disable its print formatting process so that the original escape sequences from the host are retained, select the PassThru option. (Note that the PassThru option will be unselectable if the printer driver currently selected does not support this facility.) If you find a through print results in data being split into lines, each treated as a separate print job, specify a time in the Seconds Close Delay box (e.g. 5 seconds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely. When set to 0, TeemTalk will not start printing until it receives a 'print end of job' command from the host. Entering any other number will cause TeemTalk to print after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. If you require the port to be kept open all the time (to stop the printer resetting) enter -1 (minus one). 2-32