HP Pavilion dv3000 HP Pavilion dv3000 Entertainment PC - Maintenance and Servi - Page 48

Hard drive, The hard drive bay cover is included in the Plastics Kit, spare part number 468821-001.

Get HP Pavilion dv3000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 320-GB, 5400-rpm 250-GB, 5400-rpm 160-GB, 5400-rpm 120-GB, 5400-rpm Hard Drive Kit (includes hard drive bracket and screws) Spare part number 468810-001 468809-001 468808-001 468807-001 468811-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). Remove the hard drive: 1. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive bay cover to the computer. 2. Lift the left side of the hard drive bay cover (2), swing it up and to the right, and remove the cover. The hard drive bay cover is included in the Plastics Kit, spare part number 468821-001. 3. Loosen the Phillips PM2.5×11.0 captive screw (1) that secures the hard drive to the computer. 4. Use the Mylar tab (2) to slide the hard drive (3) to the right until it disconnects from the system board. 40 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
320-GB, 5400-rpm
468810-001
250-GB, 5400-rpm
468809-001
160-GB, 5400-rpm
468808-001
120-GB, 5400-rpm
468807-001
Hard Drive Kit (includes hard drive bracket and screws)
468811-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery
on page
32
).
Remove the hard drive:
1
.
Loosen the two Phillips PM2.5×6.0 captive screws
(1)
that secure the hard drive bay cover to the
computer.
2
.
Lift the left side of the hard drive bay cover
(2)
, swing it up and to the right, and remove the cover.
The hard drive bay cover is included in the Plastics Kit, spare part number 468821-001.
3
.
Loosen the Phillips PM2.5×11.0 captive screw
(1)
that secures the hard drive to the computer.
4
.
Use the Mylar tab
(2)
to slide the hard drive
(3)
to the right until it disconnects from the system board.
40
Chapter
4
Removal and replacement procedures