HP Pavilion dv3000 HP Pavilion dv3000 Entertainment PC - Maintenance and Servi - Page 56
Fingerprint reader board
View all HP Pavilion dv3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
12. Remove the top cover. Reverse this procedure to install the top cover. Fingerprint reader board Description Fingerprint reader board (includes fingerprint reader board bracket) Spare part number 468831-001 Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the following components: a. Hard drive (see Hard drive on page 40) b. Optical drive (see Optical drive on page 37) c. Keyboard (see Keyboard on page 42) d. Switch cover (see Switch cover on page 44) e. Top cover (see Top cover on page 45) Remove the fingerprint reader board: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connector to which the fingerprint reader board cable is attached and disconnect the cable (1) from the connector. 48 Chapter 4 Removal and replacement procedures