HP Pavilion zd8000 HP Dual TV Tuner/Digital Video Recorder - Hardware Setup - Page 17
Links the HP Media Center Mini, Connects S-Video from your TV - drivers
View all HP Pavilion zd8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Identifying the Hardware Component 1 IR receiver 2 Power light Description Links the HP Media Center Mini Remote Control to the TV tuner. ■ Off = TV tuner is not connected to AC power. ■ Solid green = TV tuner is properly connected to AC power and the notebook. ■ Blinking green = TV tuner is sending or receiving video signals. ■ Amber = TV tuner driver is not installed. ■ Blinking amber = TV tuner error. ■ Red = TV tuner is in a low-power or suspended state. ■ Blinking red, intermittantly = TV tuner is receiving a signal from a remote control. ■ Blinking red, continuously = video signal or driver issue exists. ✎ For more information, refer to Appendix A, "Troubleshooting." 3 Input 2 right audio-in jack (red)* Connects right-channel audio from your TV source to the TV tuner using the red plug on a composite audio/video cable. 4 Input 2 left audio-in jack Connects left-channel audio from your (white)* TV source to the TV tuner using the white plug on a composite audio/video cable. 5 Input 2 composite video-in Connects video from your TV source jack (yellow)* to the TV tuner using the yellow plug on a composite audio/video cable. 6 Input 2 S-Video-in jack* Connects S-Video from your TV source to the TV tuner using an S-Video cable. *Input 2 jacks should only be used in dual-tuner connections. Use the Input 1 jacks on the rear of the TV tuner first. For information on single and dual-tuner connections, refer to "Step 2: Set Up Your Audio/Video Connection" in Chapter 3, "Media Center Setup." Hardware Setup 2-9