HP Pavilion zd8000 HP Dual TV Tuner/Digital Video Recorder - Hardware Setup - Page 22
Step 4: Complete the Setup, Advanced, Connections Optional.
View all HP Pavilion zd8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Media Center Setup To connect the HP Media Center hardware to your existing regular TV or cable TV source (without a set-top box) in a single-tuner connection: 1. Connect an RF coaxial cable from your regular TV or cable TV wall jack to the TV1 jack on the rear of the TV tuner 1. Ä Do not plug the RF coaxial cable into the FM tuner jack. Be sure you are connecting to the TV1 jack on the TV tuner. ✎ Be sure to use the connectors on the rear of the TV tuner. The connectors on the front of the TV tuner are used in dual-tuner connections only. 2. Connect the TV tuner USB cable from the USB connector on the TV tuner to a USB port on your notebook 2. 3. Complete the setup of your Media Center hardware. Refer to "Step 4: Complete the Setup," later in this chapter. ✎ For additional connection steps, such as adding a television or setting up the FM radio antenna, refer to Chapter 4, "Advanced Connections (Optional)." ✎ You can have only 1 or 2 TV inputs connected at a time. In any setup, you will have several unused jacks. Hardware Setup 3-5