HP StorageWorks 2/16V HP StorageWorks SAN Switch Rack Mount Kit Installation I - Page 11
Assembling the Outer Rails (HP 10000 Series Racks)
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
b. Depending on the rack you are using, complete one of the following tasks: - For HP 10000 Series racks, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail, as shown in Figure 4. Figure 4: Assembling the Outer Rails (HP 10000 Series Racks) SAN Switch rack mount kit installation instructions 11
11
SAN Switch rack mount kit installation instructions
b.
Depending on the rack you are using, complete one of the following
tasks:
—
For HP 10000 Series racks, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10
adapter washers in the upper and lower hole locations of the right
rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 adapter washers in the upper
and lower hole locations of the left rail, as shown in
Figure 4
.
Figure 4:
Assembling the Outer Rails (HP 10000 Series Racks)