HP StorageWorks 2/16V HP StorageWorks SAN Switch Rack Mount Kit Installation I - Page 18
Securing the Device to the Outer Rails
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Securing the Device to the Outer Rails To secure the device to the outer rails: 1. Insert the switch with the attached inner rails into the outer rails. Note: This step applies to installing a switch in HP 9000 Series, HP 10000 Series or HP System/e racks. 2. Insert the device into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 9 and Figure 10. Figure 9: Securing the Device (in HP 9000 Series or HP 10000 Series Racks) 18 SAN Switch rack mount kit installation instructions
18
SAN Switch rack mount kit installation instructions
Securing the Device to the Outer Rails
To secure the device to the outer rails:
1.
Insert the switch with the attached inner rails into the outer rails.
Note:
This step applies to installing a switch in HP 9000 Series, HP 10000 Series or HP
System/e racks.
2.
Insert the device into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side.
See
Figure 9
and
Figure 10
.
Figure 9:
Securing the Device (in HP 9000 Series or HP 10000 Series Racks)