HP StorageWorks 2/16V Brocade Access Gateway Administrator's Guide - Supportin - Page 25

To enable Access Gateway mode from the CLI, switchShow, switchDisable, ag --modeEnable, configUpload

Page 25 highlights

Enabling Access Gateway mode 2 To enable Access Gateway mode from the CLI 1. Connect and log in to the switch. 2. Enter the switchShow command to display the current switch configuration. The example below shows a switch in the Fabric OS Native mode (where switchMode equals Native). switch:admin> switchshow switchName: switch switchType: 43.2 switchState: Online switchMode: Native switchRole: Principal switchDomain: 1 switchId: fffc01 switchWwn: 10:00:00:05:1e:03:4b:e7 zoning: OFF switchBeacon: OFF Area Port Media Speed State Proto 0 0 -- N4 No_Module 1 1 cu N4 Online F-Port 50:06:0b:00:00:3c:b7:32 2 2 cu N4 Online F-Port 10:00:00:00:c9:35:43:f5 3 3 cu AN No_Sync 4 4 cu AN No_Sync Disabled (Persistent) 5 5 cu N4 Online F-Port 50:06:0b:00:00:3c:b4:3e 6 6 cu N4 Online F-Port 10:00:00:00:c9:35:43:f3 7 7 cu AN No_Sync Disabled (Persistent) 8 8 cu AN No_Sync 9 9 cu AN No_Sync Disabled (Persistent) 10 10 cu AN No_Sync Disabled (Persistent) 11 11 cu AN No_Sync Disabled (Persistent) 12 12 cu AN No_Sync Disabled (Persistent) 13 13 cu AN No_Sync Disabled (Persistent) 14 14 cu AN No_Sync Disabled (Persistent) 15 15 cu AN No_Sync Disabled (Persistent) 16 16 cu AN No_Sync Disabled (Persistent) 17 17 -- N4 No_Module 18 18 -- N4 No_Module 19 19 -- N4 No_Module 20 20 -- N4 No_Module 21 21 id N4 Online E-Port segmented,(zone conflict)(Trunk master) 22 22 id N4 Online E-Port (Trunk port, master is Port 21 ) 23 23 id N4 Online E-Port (Trunk port, master is Port 21 ) 3. Enter the switchDisable command to disable the switch. switch:admin> switchdisable Note To save the switch configuration, use the configUpload command before proceeding with the next step. 4. Enter the ag --modeEnable command to enable Access Gateway mode. switch:admin> ag --modeenable The switch automatically reboots and comes back online in Access Gateway mode using a factory default F_Port to N_Port mapping. See Appendix A, "Default Port Mapping". Access Gateway Administrator's Guide 2-5 Publication Number: 53-1000430-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Access Gateway Administrator’s Guide
2-5
Publication Number: 53-1000430-01
Enabling Access Gateway mode
2
To enable Access Gateway mode from the CLI
1.
Connect and log in to the switch.
2.
Enter the
switchShow
command to display the current switch configuration.
The example below shows a switch in the Fabric OS Native mode (where switchMode equals
Native).
3.
Enter the
switchDisable
command to disable the switch.
4.
Enter the
ag --modeEnable
command to enable Access Gateway mode.
The switch automatically reboots and comes back online in Access Gateway mode using a factory
default F_Port to N_Port mapping. See
Appendix A, “Default Port Mapping”
.
switch:admin> switchshow
switchName:
switch
switchType:
43.2
switchState:
Online
switchMode:
Native
switchRole:
Principal
switchDomain:
1
switchId:
fffc01
switchWwn:
10:00:00:05:1e:03:4b:e7
zoning:
OFF
switchBeacon:
OFF
Area Port Media Speed State
Proto
=====================================
0
0
--
N4
No_Module
1
1
cu
N4
Online
F-Port
50:06:0b:00:00:3c:b7:32
2
2
cu
N4
Online
F-Port
10:00:00:00:c9:35:43:f5
3
3
cu
AN
No_Sync
4
4
cu
AN
No_Sync
Disabled (Persistent)
5
5
cu
N4
Online
F-Port
50:06:0b:00:00:3c:b4:3e
6
6
cu
N4
Online
F-Port
10:00:00:00:c9:35:43:f3
7
7
cu
AN
No_Sync
Disabled (Persistent)
8
8
cu
AN
No_Sync
9
9
cu
AN
No_Sync
Disabled (Persistent)
10
10
cu
AN
No_Sync
Disabled (Persistent)
11
11
cu
AN
No_Sync
Disabled (Persistent)
12
12
cu
AN
No_Sync
Disabled (Persistent)
13
13
cu
AN
No_Sync
Disabled (Persistent)
14
14
cu
AN
No_Sync
Disabled (Persistent)
15
15
cu
AN
No_Sync
Disabled (Persistent)
16
16
cu
AN
No_Sync
Disabled (Persistent)
17
17
--
N4
No_Module
18
18
--
N4
No_Module
19
19
--
N4
No_Module
20
20
--
N4
No_Module
21
21
id
N4
Online
E-Port
segmented,(zone conflict)(Trunk master)
22
22
id
N4
Online
E-Port
(Trunk port, master is Port 21 )
23
23
id
N4
Online
E-Port
(Trunk port, master is Port 21 )
switch:admin> switchdisable
Note
To save the switch configuration, use the
configUpload
command before proceeding
with the next step.
switch:admin> ag --modeenable