HP StorageWorks 2/16V Brocade Access Gateway Administrator's Guide - Supportin - Page 35
Displaying the port status, To display an N_Port map
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Determining the mapping and port status 4 To display an N_Port map 1. Connect and log in to the switch. 2. Enter the ag --mapshow command and specify the port number to display the N_Port failover and failback policies and the mapped F_Ports. N_Port Number of the port. Failover Indicates whether or not the failover policy is enabled (1) or disabled (0) on the N_Port. Failback Current F_Ports Indicates whether or not the failback policy is enabled (1) or disabled (0) on the N_Port. Shows the F_Ports that are currently connected to the fabric on this N_Port. In the case of failover, the Current F_Port and Configured F_Ports differ. For example (shown below), 8 failed over to this port from another port. Configured F_Ports Indicates the ports which are mapped to this N_Port. switch:admin> ag --mapshow 0 N_Port : 0 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : 2;8; Configured F_Ports : 2; Displaying the port status This section explains how to determine the ports status. Access Gateway Administrator's Guide 4-3 Publication Number: 53-1000430-01