HP StorageWorks 2/16V Brocade Access Gateway Administrator's Guide - Supportin - Page 51

ag D --mapadd --mapdel --failovershow [N_Port] --failoverdisable --failoverenable --failbackshow [N_Port] --failbackdisable --failbackenable Adds F_Ports to existing N_Port. The traffic for the configured F_Ports to be routed to the fabric through the specified N_Port when the F_Port comes online. An F_Port can be mapped to only one N_Port. Specify the N_Port number to which the F_Ports are to be mapped. This command overwrites the existing mapping for the N_Port. Specify the list of F_Port numbers to add to the existing specified F_Port to N_Port mapping. The F_Port numbers must be separated my semicolons. Removes the specified F_Ports from the N_Port mapping. Specify the N_Port number to which the F_Ports are currently mapped. Specify the list of F_Port numbers to remove from the specified F_Ports to N_Port mapping. The F_Port numbers must be separated by semicolons. Displays the failover policy for the N_Port. Use this command with the N_Port parameter to see if the failover for this N_Port is enabled or not. If an N_Port failure occurs when the failover policy is enabled, all F_Ports mapped to the failed N_Port will failover to another N_Port connected to the same fabric, and then those F_Ports are re-enabled. Disables the failover policy for an N_Port. Enables the failover policy for an N_Port. When the failover policy is enabled for an N_Port and failure occurs on that port, all F_Ports mapped to the failed N_Port will failover to another N_Port connected to the same fabric, and then those F_Ports are reenabled. Displays the failover policy for the N_Port (s). Disables the failback policy for an N_Port. Enables the failback policy for an N_Port. Access Gateway Administrator's Guide D-3 Publication Number: 53-1000430-01