HP StorageWorks 2/16V Brocade Access Gateway Administrator's Guide - Supportin - Page 38
Removing F_Ports, To remove an F_Port from an N_Port
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Configuring port maps Where the f_portlist can contain multiple F_Port numbers separated by semicolons, for example "17;18". switch:admin> ag --mapadd 13 6 F-Port to N-Port mapping has been updated successfully 4. Enter the ag --mapshow command with the n_portnumber operand to display a list of mapped F_Ports. Verify that the F_Ports you added appear in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 6;7; Removing F_Ports Removing an F_Port from an N_Port unassigns the F_Port. The F_Port status changes to Disabled (No mapping for F-Port). To remove an F_Port from an N_Port 1. Connect and log in to the switch. 2. Enter the ag --mapdel command with the n_portnumber "f_portlist" operands to remove the list of F_Ports from the N_Port. switch:admin> ag --mapdel 13 6 F-Port to N-Port mapping has been updated successfully 3. Enter the ag --mapshow command with the n_portnumber operand to display a list of mapped F_Ports. Verify that the F_Ports you removed are not in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 7; 4-6 Access Gateway Administrator's Guide Publication Number: 53-1000430-01