HP StorageWorks 2/16V Brocade Access Gateway Administrator's Guide - Supportin - Page 54
AG-1004, Severity, Message, Probable, Cause, Recommended, Action
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
D AG-1004 Severity WARNING AG-1004 Message , [AG-1004], ,, ERROR, , Invalid response to fabric login (FLOGI) request from the fabric for N_Port . Probable Cause Recommended Action Severity Indicates that fabric sent an invalid response to FLOGI ELS of the specified N_Port. Verify the fabric switch's configuration. If the message persists, run supportFtp to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AG-1005 Message , [AG-1005], ,, WARNING, , FDISC response dropped because F_Port is offline. Probable Cause Recommended Action Severity Indicates that the F_Port which connects to the host is offline. Verify the configuration of the host connected to the specified F_Port. WARNING AG-1006 Message , [AG-1006], ,, WARNING, , FLOGI request was not received from F_Port . Port is being disabled Probable Cause Recommended Action Indicates that the F_Port which connects to the host did not send FLOGI request for 10 times E_D_TOV. F_Port is disabled. Verify the HBA driver configuration of the host connected to the specified F_Port. Access Gateway supports Fabric mode connectivity only. D-6 Access Gateway Administrator's Guide Publication Number: 53-1000430-01