HP StorageWorks 2/32 SAN switch 2/32, version 4.0.2b release notes - Page 26

Known Issues Verify that Paths are Restored Issue the show dev/multi command to verify the paths are restored, as follows: VMS06>show dev /mul $1$DGA601: (VMS06) Mounted 1 4/ 4 PGA0.5000-1FE1-5000-2DED $1$DGA602: (VMS06) Mounted 0 4/ 4 PGB0.5000-1FE1-5000-2DEC $1$DGA603: (VMS06) Mounted 0 4/ 4 PGB0.5000-1FE1-5000-2DE9 $1$DGA604: (VMS06) Mounted 1 4/ 4 PGA0.5000-1FE1-5000-2DE8 Routing Regardless of how many E_Ports are connected between two switches, the maximum routing paths are currently limited to 16 E_Ports for the SAN Switch 2/32. The urouteshow command may occasionally indicate the wrong routing paths of I/O traffic. This is a problem with the urouteshow command, as I/O traffic is still routed correctly. configDownload Command The configdownload command is designed to restore a backed-up configuration for a switch. Use caution when downloading configuration files from other switches. The following confirmation message now appears prior to completing the configdownload command on the SAN Switch 2/32: This command is used to download a backed-up configuration for a specific switch. If using a file from a different switch, this file's configuration settings will override any current switch settings. Downloading a configuration file which was uploaded from a different type of switch, may cause this switch to fail. Do you want to continue [y/n]: y The configupload and configdownload commands do not work on the Microsoft FTP server if no password is specified. The configupload and configdownload commands do not work if no password is specified. 26 SAN switch 2/32, version 4.0.2b release notes