HP StorageWorks 2/32 SAN switch 2/32, version 4.0.2b release notes - Page 29

Select All, Refresh, Workaround: Activate the Switch Information tab and the Switch Admin header

Get HP StorageWorks 2/32 - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Known Issues • When you have a large number of Web Tools pages open with a heavy workload, you may occasionally see remnants of other pages or incomplete graphics on the screen. Workaround: Refresh the Fabric View window. • Occasionally, users may request reports, such as Fabric Events, Switch Report, Port Settings and others that may not display information or display partial information for a given switch believed to be in the fabric. Workaround: Refresh the page or close the specific web page and request it again. • When using the Web Tools Fabric View or Switch View to open a telnet session from within Netscape, the telnet session is not automatically closed when exiting. Workaround: The telnet window must be closed manually. • The recommended Java plug-in for Solaris does not allow drag and drop options in some of the windows where it should be supported. • When a pop-up window requesting a user response is pushed into the background and refresh is requested, a fatal Internet Explorer error may occur. • Following a switch enable or disable, it is necessary to wait at least 25-30 seconds for the fabric to reconfigure and for FSPF route calculations to complete before requesting routing information. If accessed too early, routing information will not be shown. • Web Tools must be restarted when the Ethernet IP address is changed using the NetworkConfig View command. Web Tools will appear to freeze or hang if it is not restarted after this operation is executed. • While doing an add, delete, or replace WWN from Web Tools zoning, in confirm window, if you select different single entries twice or more, the Select All button may stop functioning. This can be seen on both Java Plug-ins 1.2.2 and 1.3.1, but is fixed in Java Plug-in 1.4.x. Workaround: Click "deselect all" and then click "select all" again. • If the user changes the Switch Name and Domain ID using the CLI after the Web Tools Switch Admin has started, the new Switch Name and Domain ID will not be updated on the header of Switch Admin. Clicking Refresh will not fix the problem. Workaround: Activate the Switch Information tab and the Switch Admin header will update. SAN switch 2/32, version 4.0.2b release notes 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Known Issues
SAN switch 2/32, version 4.0.2b release notes
29
•
When you have a large number of Web Tools pages open with a heavy workload,
you may occasionally see remnants of other pages or incomplete graphics on the
screen.
Workaround: Refresh the Fabric View window.
•
Occasionally, users may request reports, such as Fabric Events, Switch Report,
Port Settings and others that may not display information or display partial
information for a given switch believed to be in the fabric.
Workaround: Refresh the page or close the specific web page and request it again.
•
When using the Web Tools Fabric View or Switch View to open a telnet session
from within Netscape, the telnet session is not automatically closed when exiting.
Workaround: The telnet window must be closed manually.
•
The recommended Java plug-in for Solaris does not allow drag and drop options
in some of the windows where it should be supported.
•
When a pop-up window requesting a user response is pushed into the background
and refresh is requested, a fatal Internet Explorer error may occur.
•
Following a switch enable or disable, it is necessary to wait at least 25–30 seconds
for the fabric to reconfigure and for FSPF route calculations to complete before
requesting routing information. If accessed too early, routing information will not
be shown.
•
Web Tools must be restarted when the Ethernet IP address is changed using the
NetworkConfig View
command. Web Tools will appear to freeze or hang if
it is not restarted after this operation is executed.
•
While doing an add, delete, or replace WWN from Web Tools zoning, in confirm
window, if you select different single entries twice or more, the
Select All
button
may stop functioning. This can be seen on both Java Plug-ins 1.2.2 and 1.3.1, but
is fixed in Java Plug-in 1.4.x.
Workaround: Click “deselect all” and then click “select all” again.
•
If the user changes the Switch Name and Domain ID using the CLI after the Web
Tools Switch Admin has started, the new Switch Name and Domain ID will not be
updated on the header of Switch Admin. Clicking
Refresh
will not fix the
problem.
Workaround: Activate the Switch Information tab and the Switch Admin header
will update.