HP StorageWorks 2/32 SAN switch 2/32, version 4.0.2b release notes - Page 4
Firmware Version 4.0.2b Overview, Prerequisites for Upgrading or Restoring Firmware - storageworks 2000
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Firmware Version 4.0.2b Overview Firmware Version 4.0.2b Overview The hp StorageWorks SAN Switch 2/32 ships with Version 4.0.2b firmware. Firmware improvements per this release involve: • link initialization • API • SNMP • help • firmware download • web server security. Prerequisites for Upgrading or Restoring Firmware Read this section before upgrading/restoring switch firmware. Verify that a Windows NT or 2000 FTP Server is Installed An FTP server must be installed and running when performing the Telnet command configUpload on a Windows NT or 2000 system. If you do not have a Microsoft Windows NT or 2000 FTP service previously installed on your system, you need to install it. Use the following steps to install and configure a Windows NT or 2000 FTP server. 1. Create a folder for the switch firmware and configuration files. 2. Install the Windows NT or 2000 FTP server on your system from your Windows installation CD. NOTE: If you only use the FTP server for the firmware and configuration loads, you can specify the folder created in Step 1 as the FTP Publish Directory. 3. Open the Internet Service Manager Tool. 4. Issue the configUpload command. Save the configuration. 4 SAN switch 2/32, version 4.0.2b release notes