HP StorageWorks 4000/6000/8000 .HP StorageWorks SAN Design Reference Guide, Pa - Page 148
Fabric rules for C-series Fibre Channel switches
View all HP StorageWorks 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Fabric rules for C-series Fibre Channel switches The following fabric rules apply to all C-series Fibre Channel SANs. They also apply, in general, to HP XP Continuous Access and HP Continuous Access EVA configurations. However, additional rules apply to HP Continuous Access implementations. See the HP StorageWorks Continuous Access EVA Planning Guide for detailed information. Table 50 lists the rules for creating a SAN with C-series Fibre Channel switches. Table 50 C-series Fibre Channel switch fabric rules Rule nl number 1 2 3 Description Up to 60 MDS switches with up to 4,000 total ports and 3,500 user ports in a fabric MDS 9506 switch supports up to 192 ports over four modular slots (four 48-port modules). (See "C-series Fibre Channel switches" on page 135 for information about the 48-port module.) MDS 9509 switch supports up to 336 ports over seven modular slots (seven 48-port modules). (See "C-series Fibre Channel switches" on page 135 for information about the 48-port module.) Note: This requires Supervisor-2 Module. 4 MDS 9513 switch supports up to 528 ports over eleven modular slots (eleven 48-port modules). (See "C-series Fibre Channel switches" on page 135 for information about the 48-port module.) 5 Maximum of seven switch hops (eight switches) between any two communicating devices 6 Maximum of 80 VSANs per fabric1 Note: VSANs and IVR are not supported on the MDS 9020. IVR is not supported on the MDS 9124, MDS 9124e, and MDS 9134. 7 Maximum of 10,000 IVR shared devices per routed fabric 8 Maximum of 8,000 IVR zones per routed fabric Persistent FCID mode (default setting) is required on all C-series Fibre Channel switches in 9 fabrics or VSANs that include HP-UX or IBM AIX servers, when implementing port-based fabric zoning. 10 NPV mode with Cisco MDS 9124e for HP c-Class BladeSystem, MDS 9124, and MDS 9134 require SAN-OS 3.2(1a) or later. NPV mode supports interoperability with B-series firmware 5.3.0, 5.3.0b, and 6.1.0d, and M-series firmware 09.06.02. (See "BladeSystem with Cisco N_Port Virtualization mode" on page 192.) 11 FCIP is supported with IPsec data encryption using the 18/4 Multiservice Module, 14/2 Multi- protocol Services Module, MDS 9216i, and MDS 9222i. IPsec is supported with Continuous Access EVA and Continuous Access XP. 1MDS 9124, MDS 9124e, and MDS 9134 support a maximum of 16 VSANs. NOTE: Not all topologies can support the maximum port or switch count. 148 C-series switches and fabric rules