HP StorageWorks 4000/6000/8000 .HP StorageWorks SAN Design Reference Guide, Pa - Page 371
Software support, Management software
View all HP StorageWorks 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Software support This section describes the software supported by the EVA iSCSI Connectivity Option. Management software The required minimum versions of Command View EVA management software are as follows: • Command View 9.0.1 or later is required for EVA6400/8400. • Command View 8.1 or later is required for array-based management. • Command View 8.0.1 or later is required for EVA4400 (embedded switch) storage systems. • Command View 8.0x or later is required for the mpx100/100b running firmware version 2.4x or later. • The EVA iSCSI Connectivity Options support Command View EVA iSCSI connectivity (Fibre Channel switch not required). See Figure 138 and Figure 139 and refer to the HP StorageWorks Command View EVA iSCSI deployment white paper at http://h18006.www1.hp.com/storage/sanwhitepapers.html. NOTE: HP StorageWorks mpx Manager is required for mpx100/100b management. Discovery IP address D1 Presented iSCSI targets FP1B FP1A mpx100/100b MGMT HP StorageWorks mpx100 MGMT IOIOI ! FC1 FC2 GE1 GE2 FC1 FC2 GE1 IP network management (WAN/LAN) IP network D1 iSCSI data (LAN/VLAN) NIC iSCSI initiator & Command View EVA server EVA Storage System Figure 138 Command View EVA iSCSI connectivity configuration 1 . 26484b SAN Design Reference Guide 371