HP StorageWorks 4000/6000/8000 .HP StorageWorks SAN Design Reference Guide, Pa - Page 258
Cabling, Level 4 NSPOF configuration
View all HP StorageWorks 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
Cabling This section describes cabling options for high-availability multipathing configurations for EVA storage systems. Level 4 NSPOF configuration Figure 67 through Figure 71 show cabling options when implementing a level 4, high-availability, NSPOF configuration. For a description of availability levels, see "Data availability" on page 53. Figure 67 shows the physical connections for a cross-cable, high-availability NSPOF configuration for EVA3000/5000 VCS 3x storage systems using two separate fabrics. This cabling is the same cabling scheme used for HP Continuous Access EVA. You can upgrade to an HP Continuous Access EVA solution without needing to re-cable controller connections. The cross-cable configuration shown in Figure 67 is also supported for non-HP Continuous Access EVA storage systems with VCS 3.x. 25129b Figure 67 EVA3000/5000 VCS 3x cross-cable configuration . Figure 68 shows the physical connections for a straight-cable, high-availability NSPOF configuration for EVA4000/4100/6000/6100 and EVA3000/5000 VCS 4x storage systems. This cabling scheme supports non-HP Continuous Access EVA configurations and HP Continuous Access EVA configurations with EVA4000/4100/6000/6100 and EVA3000/5000 VCS 4x storage systems. This configuration is not supported with HP Continuous Access EVA for EVA3000/5000 VCS 3x storage systems. 258 EVA storage system rules