HP StorageWorks 4000/6000/8000 .HP StorageWorks SAN Design Reference Guide, Pa - Page 194
NPV with FlexAttach, NPV mode connectivity guidelines
View all HP StorageWorks 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
• Failover between NP_Ports (uplinks) is supported. • Direct storage attachment is not supported, (requires at least one external Fibre Channel switch). • F_Ports, NP_Ports, and SD_Ports are supported. • NPIV-capable module servers (nested NPIV) are supported. • Local switching is not supported. All traffic is switched using the NPV core switch. • Remote SPAN is not supported. • NPV mode is managed separately from the BladeSystem; however, if used with C-series switches, it uses a common SAN-OS. NPV mode connectivity guidelines NPV solutions are best suited for C-series-only fabrics in which you want multivendor switch interoperability through NP_Ports instead of E_Ports. Figure 52 shows an NPV device with dual redundant fabrics. Server Bay 16 Server Bay 15 Server Bay 14 Server Bay 13 Server Bay 12 Server Bay 11 Server Bay 10 Server Bay 9 Server Bay 8 Server Bay 7 Server Bay 6 Server Bay 5 Server Bay 4 Server Bay 3 Server Bay 2 Server Bay 1 Blade enclosure with 16 servers N_Port Virtualization N_Port Virtualization NP_Ports (NPIV) (uplinks) Blade enclosure/ Server management SAN/ Storage management FC Fabric (B-, C-, or M-series) (with NPIV F_Port support) FC Fabric (B-, C-, or M-series) (with NPIV F_Port support) Figure 52 NPV device with dual redundant fabrics . 25346b NOTE: The NP_Ports in Figure 52 are not host N_Ports and cannot connect directly to storage. The configuration shown in Figure 52 includes: • Redundant SANs, with each server connecting to one fabric through one NPV device • Connectivity to C-series, B-series, and M-series fabrics • Support for up to six NPV devices per HP BladeSystem c7000 enclosure, or three NPV devices per HP BladeSystem c3000 enclosure NPV with FlexAttach The Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem, MDS 9124 switch, and MDS 9134 switch support NPV with FlexAttach. FlexAttach provides automatic mapping of physical WWNs to virtual WWNs using NAT. When NPV mode is enabled, FlexAttach allows SAN and server administrators to install and replace servers without having to rezone or reconfigure the SAN. 194 Heterogeneous server rules