HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2.0e release notes (5697-0354 - Page 37

Workaround prior to upgrade, firmwaredownload, turboramtest, ts.tz, Tstimezone, config, download

Get HP StorageWorks 8/80 - SAN Switch PDF manuals and user guides View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

When the switch name is set using CLI and then read using the Read Port Address Name x'B2' command to the CUP Port x'FE' it returns the switch name with a x'7F' attach after the last character in the Switch Name. Fixed in Fabric OS 6.2.0. A failed Pause frame (sent during firmwaredownload process in Interop Modes 2 and 3), causes a fabric rebuild. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Use the -o option to override the cooperative HCL feature. In some instances, HCL on an HP StorageWorks 8/40 SAN switch in Interop Mode requires the use of the -o option. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Use the -o option. A turboramtest failure does not fully disable the port on an HP StorageWorks 8/80 SAN switch. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Reboot the switch. Web Tools: The HP StorageWorks DC04 SAN Director attention LEDs on the switch view GUI window do not turn amber when blade needs Fixed in Fabric OS 6.2.0. attention. N-Port between AG and Edge Switch (300) may become stuck at E_Port Unknown state.D Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Disable and then enable the port on the AG to bring the port back online as an N-Port. After multiple successive fastboots of an HP StorageWorks DC04 SAN Director, there was a panic due to the zone daemon dying. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Fastboot a single time. FICON PTP VTS Selective Resets and Aborted sequences caused by incorrect entry into FICON tape read pipelining. Fixed in Fabric OS 6.2.0. EX_Port fails to come online after downgrading firmware from Fabric OS 6.x to 5.3 under certain conditions. Fixed in Fabric OS 6.2.0. Tstimezone settings cannot be changed or restored with configdownload. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Remove the ts.tz parameter in the config file and then download. If a large number of EX_Ports are enabled at the same time, occasionally some fail due to incompatible flow control parameters. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Portdisable and then enable the EX_Ports that failed. In some instances, portshow may display inaccurate port authentication description or state after a CP failover. Fixed in Fabric OS 6.2.0. Internal server ports on embedded platform: traffic may stop due to loss of buffer credit. Fixed in Fabric OS 6.2.0. HP StorageWorks Fabric OS 6.2.0e release notes 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Fixed in Fabric OS 6.2.0.
When the switch name is set using CLI and then read using the Read
Port Address Name x'B2' command to the CUP Port x'FE' it returns the
switch name with a x'7F' attach after the last character in the Switch
Name.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Use the
-o
option to override the co-
operative HCL feature.
A failed Pause frame (sent during
firmwaredownload
process in
Interop Modes 2 and 3), causes a fabric rebuild.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Use the
-o
option.
In some instances, HCL on an HP StorageWorks 8/40 SAN switch in
Interop Mode requires the use of the
-o
option.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Reboot the switch.
A
turboramtest
failure does not fully disable the port on an HP
StorageWorks 8/80 SAN switch.
Fixed in Fabric OS 6.2.0.
Web Tools: The HP StorageWorks DC04 SAN Director attention LEDs
on the switch view GUI window do not turn amber when blade needs
attention.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Disable and then enable the port on
the AG to bring the port back online
as an N-Port.
N-Port between AG and Edge Switch (300) may become stuck at
E_Port Unknown state.D
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Fastboot a single time.
After multiple successive fastboots of an HP StorageWorks DC04 SAN
Director, there was a panic due to the zone daemon dying.
Fixed in Fabric OS 6.2.0.
FICON PTP VTS Selective Resets and Aborted sequences caused by
incorrect entry into FICON tape read pipelining.
Fixed in Fabric OS 6.2.0.
EX_Port fails to come online after downgrading firmware from Fabric
OS 6.x to 5.3 under certain conditions.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Remove the
ts.tz
parameter in the
config file and then download.
Tstimezone
settings cannot be changed or restored with
config-
download
.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Portdisable
and then enable the
EX_Ports that failed.
If a large number of EX_Ports are enabled at the same time, occasion-
ally some fail due to incompatible flow control parameters.
Fixed in Fabric OS 6.2.0.
In some instances,
portshow
may display inaccurate port authentic-
ation description or state after a CP failover.
Fixed in Fabric OS 6.2.0.
Internal server ports on embedded platform: traffic may stop due to
loss of buffer credit.
HP StorageWorks Fabric OS 6.2.0e release notes
37