HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2.0g release notes (5697-0035 - Page 44

HP StorageWorks Encryption SAN Switch went faulty when starting - san switch default password

Page 44 highlights

Detected termination of 0.weblinker.fcg on HP StorageWorks DC04 SAN Director and messages like KSWD-1002, 5766, SLOT Fixed in Fabric OS 6.2.0d 4 | FFDC | CHASSIS, WARNING displayed on the console. After enabling Virtual Fabric via DCFM on HP StorageWorks 8/40 SAN Switch, some ports may be disabled. Fixed in Fabric OS 6.2.0d Missing FICON interrupt on HP StorageWorks DC04 SAN Director due to CUP not responding in time before channel timed out. Fixed in Fabric OS 6.2.0d Security commands such as fddcfg -fabwideset fail with RCS transaction error. Fixed in Fabric OS 6.2.0d When performing firmwareupgrade from Fabric OS 6.1x to 6.2.0 then reverting back to 6.1.x via firmwarerestore, the downgrade fails and leaves the CP with unrecoverable passwords, leaving it in an inconsistent state where the user may not be able to login. Workaround prior to upgrade: Once passwords are blocked, boot into single user mode and reset system passwords. Fixed in Fabric OS 6.2.0d Disconnecting/reconnecting an ISL on the HP StorageWorks Encryption SAN Switch while a rekey operation is in progress may result in failure Fixed in Fabric OS 6.2.0d of new key creation. LUN state shows Rekey ACK timeout. CP panicked with FICUD crash and rebooted during supportsave. Workaround prior to upgrade: After enabling FMSMODE for the first time, do switchdisable/switchenable - hafailover - hareboot reboot. Fixed in Fabric OS 6.2.0d If ISL links between two encryption cluster nodes are continuously disconnected/reconnected during rekey operations, one of the LUNs can Fixed in Fabric OS 6.2.0d hang at LUN discovery state. LUNs in a container show target offline, leading to the host no longer Fixed in Fabric OS 6.2.0d having access to their LUNs through the crypto target containers. With tape pipelining active, the switch may return a good status without Fixed in Fabric OS 6.2.0d sending data, leading to tape I/O failure/errors. The host detects IFCC errors to CUP port. Fixed in Fabric OS 6.2.0d HP StorageWorks Encryption SAN Switch went faulty when starting traffic, which let to loss of LUNs to the host. Fixed in Fabric OS 6.2.0d Taking SKM down while rekeys are in progress causes a LUN to get stuck in Not ready (Key creation) state. Fixed in Fabric OS 6.2.0d When attempting to swap ports from the Web Tools GUI, the operation Fixed in Fabric OS 6.2.0d may fail due to an HTTP 500 error. Default SNMP v3 values set differently in different Fabric OS releases leading to the mibcapability option of snmpconfig not being able to control ficon mib. Fixed in Fabric OS 6.2.0d In Access Gateway mode, if the second FDISC comes in before the switch responds to the first FDISC between the same pair of devices, the Access Gateway panics, triggering a reboot. Fixed in Fabric OS 6.2.0d 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Fixed in Fabric OS 6.2.0d
Detected termination of
0.weblinker.fcg
on HP StorageWorks
DC04 SAN Director and messages like
KSWD-1002, 5766, SLOT
4 | FFDC | CHASSIS, WARNING
displayed on the console.
Fixed in Fabric OS 6.2.0d
After enabling Virtual Fabric via DCFM on HP StorageWorks 8/40
SAN Switch, some ports may be disabled.
Fixed in Fabric OS 6.2.0d
Missing FICON interrupt on HP StorageWorks DC04 SAN Director
due to CUP not responding in time before channel timed out.
Fixed in Fabric OS 6.2.0d
Security commands such as
fddcfg -fabwideset
fail with RCS
transaction error.
Workaround prior to upgrade:
Once
passwords are blocked, boot into
single user mode and reset system
passwords.
Fixed in Fabric OS 6.2.0d
When performing
firmwareupgrade
from Fabric OS 6.1x to 6.2.0
then reverting back to 6.1.x via
firmwarerestore
, the downgrade
fails and leaves the CP with unrecoverable passwords, leaving it in
an inconsistent state where the user may not be able to login.
Fixed in Fabric OS 6.2.0d
Disconnecting/reconnecting an ISL on the HP StorageWorks Encryption
SAN Switch while a rekey operation is in progress may result in failure
of new key creation. LUN state shows
Rekey ACK timeout
.
Workaround prior to upgrade:
After
enabling FMSMODE for the first time,
do
switchdisable
/
switchenable
-
hafailover
-
hareboot
-
reboot
.
Fixed in Fabric OS 6.2.0d
CP panicked with FICUD crash and rebooted during
supportsave
.
Fixed in Fabric OS 6.2.0d
If ISL links between two encryption cluster nodes are continuously dis-
connected/reconnected during rekey operations, one of the LUNs can
hang at
LUN discovery
state.
Fixed in Fabric OS 6.2.0d
LUNs in a container show target offline, leading to the host no longer
having access to their LUNs through the crypto target containers.
Fixed in Fabric OS 6.2.0d
With tape pipelining active, the switch may return a good status without
sending data, leading to tape I/O failure/errors.
Fixed in Fabric OS 6.2.0d
The host detects IFCC errors to CUP port.
Fixed in Fabric OS 6.2.0d
HP StorageWorks Encryption SAN Switch went faulty when starting
traffic, which let to loss of LUNs to the host.
Fixed in Fabric OS 6.2.0d
Taking SKM down while rekeys are in progress causes a LUN to get
stuck in
Not ready (Key creation)
state.
Fixed in Fabric OS 6.2.0d
When attempting to swap ports from the Web Tools GUI, the operation
may fail due to an HTTP 500 error.
Fixed in Fabric OS 6.2.0d
Default SNMP v3 values set differently in different Fabric OS releases
leading to the
mibcapability
option of
snmpconfig
not being
able to control ficon mib.
Fixed in Fabric OS 6.2.0d
In Access Gateway mode, if the second FDISC comes in before the
switch responds to the first FDISC between the same pair of devices,
the Access Gateway panics, triggering a reboot.
44