HP t505 Troubleshooting Guide t505 Flexible Thin Client - Page 37
no Client IP., ERROR: Non-system disk or disk error. Replace and press, any key when ready., ready.
View all HP t505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
If you are running in a Linux environment go to step 3. 2. If you are running in an MS RIS PXE environment press the F12 key to activate the network service boot as soon as the DHCP IP information appears on the screen. If the unit does not boot to the network the server is not configured to PXE. If you missed the F12 cue, the system will try to boot to the ATA flash that is not present. The message on the screen will read: ERROR: Non-system disk or disk error. Replace and press any key when ready. Pressing any key will restart the boot cycle. 3. If you are running in a Linux environment, an error message will appear on the screen if there is no Client IP. ERROR: Non-system disk or disk error. Replace and press any key when ready. Troubleshooting 31