Honeywell HJK7000 User Guide - Page 57
Port Settings, KeyClick, LCD B/L, Calibration Touchscreen, IP Address, Subnet Mask, Default Gateway
View all Honeywell HJK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
UltraKey Plus Controller Installation and User Guide Port Settings To configure port settings, press Port Settings. • Serial Port Settngs (COM 1) Press COM1 to set type(RS422 or RS485), Baudrate, Databit, Parity and Stopbit. • Serial Port Settings (COM 2) Press COM2 to set type(RS232 or RS485), Baudrate, Databit, Parity and Stopbit. • Ethernet Settings Press Ethernet and then IP Address, Subnet Mask, Default Gateway and Sys.Cntl.IP Address to modify. KeyClick To change the sound volume of key pressing, press KeyClick. LCD B/L To adjust LCD backlight, keep pressing the button until a proper level is displayed. Calibration Touchscreen Touch the five red dots on the screen to calibration the touchscreen. Document 800-02573 Rev B 57 11/2009
UltraKey Plus Controller Installation and User Guide
Document 800-02573 Rev B
57
11/2009
Port Settings
To configure port settings, press
Port Settings
.
•
Serial Port Settngs (COM 1)
Press
COM1
to set type(RS422 or RS485), Baudrate,
Databit, Parity and Stopbit.
•
Serial Port Settings (COM 2)
Press COM2 to set type(RS232 or RS485), Baudrate,
Databit, Parity and Stopbit.
•
Ethernet Settings
Press Ethernet and then
IP Address
,
Subnet Mask
,
Default Gateway
and
Sys.Cntl.IP Address
to modify.
KeyClick
To change the sound volume of
key pressing, press
KeyClick
.
LCD B/L
To adjust LCD backlight, keep pressing the button until a proper level is displayed.
Calibration Touchscreen
Touch the
five
red dot
s
on the screen
to calibration the touchscreen
.