Honeywell HJK7000 User Guide - Page 68
Upgrading the UltraKey Plus Firmware, Rebooting UltraKey Plus, Upgrade, Software Upgrade
View all Honeywell HJK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
System Administration and Troubleshooting Upgrading the UltraKey Plus Firmware 1. Log onto the web browser. 2. From the top menu, click the Upgrade tab. The warning message Please make sure the network connection is connected during system upgrading displays. See Figure 4-5. 3. Click OK. The Software Upgrade menu opens. 4. Select a Folder from the drop-down list: Application, FPGA, Kernel, BL or FS. 5. In the Select File field, click Browse. Navigate to the file and click OK. 6. Click Send to start the upgrade process. The Upgrade Status window opens. Messages display to indicate when the old files are being erased and the new files are being copied. 7. When the process is complete, the message Upgrade success displays and the system reboots. Figure 4-5 Software Upgrade Warning Message Rebooting UltraKey Plus 1. Log onto the web browser. 2. From the top menu, click the System Reboot tab. The Reboot System window opens. 3. Click Reboot to continue or click another tab or Logout to exit without rebooting. 68