Husqvarna AUTOMOWER 520 Owner Manual - Page 41

Note: If the main working area has to be cut after charging, it is recommended to select Resume on main area when placing the robotic lawnmower back in the charging station. 4.4 Operating mode - Park When selecting Park the following operation selections can be chosen. • Park until further notice • Start on next timer • Parking duration 4.4.1 Park until further notice When Park until further notice is chosen, the robotic lawnmower stays in the charging station until Start is selected. 1. Select Dashboard in the Main menu. 2. Select Park. 3. Select Until further notice. 4.4.2 Start on next timer The robotic lawnmower stays in the charging station until the next Timer setting permits operation. This operation selection is suitable if one wishes to cancel an ongoing mowing cycle and allow the robotic lawnmower to stay in the charging station until next Timer setting permits operation. 1. Select Dashboard in the Main menu. 2. Select Park. 3. Select Start on next timer. 4.4.3 Parking duration In the Park menu it is possible to choose parking duration. The robotic lawnmower stays in the charging station for the chosen park duration and then automatically returns to normal operation. This operation selection is suitable when there is a need to pause operation for a known time period. This could be the case for a shorter time period, for example when watering the lawn. It could also be the case for a longer period, for example if the grass is too short and need to grow for a couple of days. When the choosen duration is over, the robotic lawnmower follows the normal Timer settings. 1. Select Dashboard in the Main menu. 2. Select Park. 3. Slide the horizontal bar of Parking duration to find a suitable duration. It is possible to override the timer up to 7 days. 4. Select a suitable parking duration. 4.4.4 The charging station's park button The PARK button on the charging station is applicable for Automower® 520 and Automower® 550. It is used to call the robotic lawnmower back to the charging station. Park in the Automower® Connect app offers the same function. The PARK button on the charging station is useful for instance when the robotic lawnmower operates in a large working area and the operator does not have access to the Automower® Connect app. An LED in the PARK button is lit when the button has been pressed. The LED diode goes out when the robotic lawnmower is parked in the charging station. The robotic lawnmower remains parked in the charging station until Start in the Automower® Connect app has been activated. 4.4.5 Operating mode - Pause When selecting Pause in the Automower® Connect app, it sends a command to the robotic lawnmower to stop the current activity and pause. The robotic lawnmower is paused until either Park or Start is selected in the app. 4.5 Stop 1. Press the STOP button on top of the robotic lawnmower. The robotic lawnmower stops and the blade motor stops. 4.6 Switch off 1. Press the STOP button on top of the robotic lawnmower. 2. Set the Main switch to position 0. 362 - 002 - 06.02.2018 Operation - 41