Husqvarna AUTOMOWER 520 Owner Manual - Page 9

How to lift and move the robotic lawnmower

Page 9 highlights

Warning! Automatic lawnmower! Keep away from the machine! Supervise children! Warning! Automatic lawnmower! Keep away from the machine! Supervise children! • Use the PARK function or switch off the main switch when persons, especially children or pets, are in the cutting area. It is recommended to program the lawnmower for use during hours when the area is free from activity, e.g. at night. See Timer on page 24. • The robotic lawnmower may only be operated, maintained and repaired by persons that are fully conversant with its special characteristics and safety regulations. Please read the Operator's Manual carefully and make sure you understand the instructions before using the robotic lawnmower. • It is not permitted to modify the original design of the robotic lawnmower. All modifications are made at your own risk. • Check that there are no stones, branches, tools, toys or other objects on the lawn that can damage the blades. Objects on the lawn can also lead to the robotic lawnmower getting stuck in them and help may be required to remove the object before the mower can continue mowing. Always set the main switch in position 0 before clearing a blockage. • The robotic lawnmower must never be allowed to collide with persons or other living creatures. If a person or other living creature comes in the lawnmower's way it shall be stopped immediately. See Stop on page 41. • Do not put anything on top of the robotic lawnmower or its charging station. • Do not allow the robotic lawnmower to be used with a defective guard, blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. Never connect a damaged cable, or touch a damaged cable before it is disconnected from the supply. • Do not use the robotic lawnmower if the main switch does not work. • Always switch off the robotic lawnmower using the main switch when the robotic lawnmower is not in use. The robotic lawnmower can only start when the main switch is set to 1 and the correct PIN code has been entered. • The robotic lawnmower must never be used at the same time as a sprinkler. Use the timer function (see Timer on page 24) so the mower and sprinkler never run simultaneously. • Husqvarna does not guarantee full compatibility between the robotic lawnmower and other types of wireless systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar. • The built-in alarm is very loud. Be careful, especially if the robotic lawnmower is handled indoors. • Metal objects in the ground (for example reinforced concrete or anti-mole nets) can result in a stoppage. The metal objects can cause interference with the loop signal which then can lead to a stoppage. • The robotic lawnmower must never be stored, operated or charged in temperatures below 0 °C / 32 °F or above 45 °C / 113 °F. This might cause damage to the product. 2.3.2 How to lift and move the robotic lawnmower To safely move from or within the working area: 1. Press the STOP button to stop the robotic lawnmower. • Start the robotic lawnmower according to the instructions. When the main switch is set to 1; make sure to keep your hands and feet away from the rotating blades. Never put your hands and feet under the robotic lawnmower. • Never touch moving hazardous parts, such as the blade disc, before it has come to a complete stop. • Never lift up the robotic lawnmower or carry it around when the main switch is in position 1. • Do not let persons who do not know how the robotic lawnmower works and behaves use it. 2. Set the main switch in position 0. 362 - 002 - 06.02.2018 Safety - 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Warning!
Automatic lawnmower!
Keep away from the machine!
Supervise children!
Warning!
Automatic lawnmower!
Keep away from the machine!
Supervise children!
Use the
PARK
function or switch off the main switch
when persons, especially children or pets, are in the
cutting area. It is recommended to program the
lawnmower for use during hours when the area is
free from activity, e.g. at night. See
Timer on page
24
.
The robotic lawnmower may only be operated,
maintained and repaired by persons that are fully
conversant with its special characteristics and safety
regulations. Please read the Operator’s Manual
carefully and make sure you understand the
instructions before using the robotic lawnmower.
It is not permitted to modify the original design of the
robotic lawnmower. All modifications are made at
your own risk.
Check that there are no stones, branches, tools,
toys or other objects on the lawn that can damage
the blades. Objects on the lawn can also lead to the
robotic lawnmower getting stuck in them and help
may be required to remove the object before the
mower can continue mowing. Always set the main
switch in position
0
before clearing a blockage.
Start the robotic lawnmower according to the
instructions. When the main switch is set to 1; make
sure to keep your hands and feet away from the
rotating blades. Never put your hands and feet
under the robotic lawnmower.
Never touch moving hazardous parts, such as the
blade disc, before it has come to a complete stop.
Never lift up the robotic lawnmower or carry it
around when the main switch is in position 1.
Do not let persons who do not know how the robotic
lawnmower works and behaves use it.
The robotic lawnmower must never be allowed to
collide with persons or other living creatures. If a
person or other living creature comes in the
lawnmower’s way it shall be stopped immediately.
See
Stop on page 41
.
Do not put anything on top of the robotic lawnmower
or its charging station.
Do not allow the robotic lawnmower to be used with
a defective guard, blade disc or body. Neither should
it be used with defective blades, screws, nuts or
cables. Never connect a damaged cable, or touch a
damaged cable before it is disconnected from the
supply.
Do not use the robotic lawnmower if the main switch
does not work.
Always switch off the robotic lawnmower using the
main switch when the robotic lawnmower is not in
use. The robotic lawnmower can only start when the
main switch is set to 1 and the correct PIN code has
been entered.
The robotic lawnmower must never be used at the
same time as a sprinkler. Use the timer function (see
Timer on page 24
) so the mower and sprinkler
never run simultaneously.
Husqvarna does not guarantee full compatibility
between the robotic lawnmower and other types of
wireless systems such as remote controls, radio
transmitters, hearing loops, underground electric
animal fencing or similar.
The built-in alarm is very loud. Be careful, especially
if the robotic lawnmower is handled indoors.
Metal objects in the ground (for example reinforced
concrete or anti-mole nets) can result in a stoppage.
The metal objects can cause interference with the
loop signal which then can lead to a stoppage.
The robotic lawnmower must never be stored,
operated or charged in temperatures below 0 °C /
32 °F or above 45 °C / 113 °F. This might cause
damage to the product.
2.3.2 How to lift and move the robotic lawnmower
To safely move from or within the working area:
1.
Press the
STOP
button to stop the robotic
lawnmower.
2.
Set the main switch in position
0
.
362 - 002 - 06.02.2018
Safety -
9