Husqvarna AUTOMOWER 520 Owner Manual - Page 49
Weak GPS signal
View all Husqvarna AUTOMOWER 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Message Guide calibration failed Cause Action The robotic lawnmower has failed to calibrate Check that the guide wires are installed ac- the guide wire. cording to the instructions, See Installation of the guide wire on page 19. Guide calibration ac- The robotic lawnmower has succeeded to complished calibrate the guide wire. No action required. GPS navigation prob- Problem with the GPS assisted navigation lem equipment. Contact your local Husqvarna representative if this message appears often. Weak GPS signal The GPS signal is weak for the current working area. GPS assisted navigation cannot be used. If the message appears often, turn off the GPS assisted navigation and instead use the manual settings for Lawn coverage, see Area 1-5 on page 28. Difficult finding home The robotic lawnmower has been following The installation has not been done correctly. the boundary wire several laps without finding See Laying the boundary wire on page 18. the charging station. Wrong corridor width setting on boundary wire. See Corridor width on page 29. The robotic lawnmower was started on a Secondary area with the Main area setting. Temporary problem Please try again. with the server. Contact your local Husqvarna representative if this message appears often. Connection problems Problem with the Automower® Connect module Restart the robotic lawnmower. If there still is a connection problem, try to unpair the robotic lawnmower (My mowers) and then pair it again. If the problem remains, contact your local Husqvarna representative. Connection settings Settings for wireless connectivity have been Check and revise settings if necessary. restored restored due to an error. Weak signal Weak GPRS signal for Automower® Connect module Make sure that the robotic lawnmower is not upside down. If the problem remains, the message requires action by an authorized service technician. SIM card requires PIN The SIM card must be unlocked. Make sure the correct SIM PIN has been entered into the mower's menu (Network > SIM card). Contact your local Husqvarna representative if this message appears often. SIM card locked The SIM card must be replaced. Contact your local Husqvarna representative. SIM card not found Automower® Connect requires a SIM card to Contact your local Husqvarna representative. be inserted in the mower. GeoFence problem The GeoFence is not working due to poor (or Contact your local Husqvarna representative. no) communication with the system. 362 - 002 - 06.02.2018 Troubleshooting - 49