IBM 419452u Installation Guide - Page 19

Integrated - computers

Get IBM 419452u - Servers System X3250 M2 Xeon 3.0ghz PDF manuals and user guides
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Table 1. Features and specifications Microprocessor: One Intel® LGA 775 single core, dual core, or quad core, depending on the server model: v Single core: Celeron 440 or later v Dual core: Core 2 Duo E4600 or Xeon E3110, or later v Quad core: Xeon 3300 series See http://www.ibm.com/servers/ eserver/serverproven/compat/us/ for a list of supported microprocessors. Notes: 1. Use the Configuration/Setup Utility program to determine the size of the L2 cache, type and speed of the microprocessor, and speed of the front-side bus. 2. Intel Virtualization Technology (VT) is not available on the Celeron 440 or the Core 2 Duo E4600; however, these microprocessors can run paravirtualization. Memory: v Minimum: Two 512 MB DIMMs v Maximum: 8 GB v Type: PC2-5300, 667 MHz, ECC, DDR II unbuffered SDRAM DIMMs v Slots: Four dual inline v Supports 512 MB, 1 GB, and 2 GB DIMMs Drives: Ultrabay Enhanced: CD or CD/DVD Expansion bays: One of the following configurations: v Two 3.5-inch slim-high bays for hard disk drives. - Hot-swap models: Supports maximum of two serial-attached SCSI (SAS) drives or two serial ATA (SATA) drives. - Simple-swap models: Supports maximum of two SATA drives v Four 2.5-inch small form-factor (SFF) hot-swap bays for hard disk drives. Supports a maximum of four 2.5-inch SAS drives. Expansion slots: Two PCI Express x8 slots, one low-profile and one 3/4-length full height. Low-profile slot supports x4 electrical. Video controller: v ATI ES1000 video on system board v 16 MB DDR II video memory Power supply: 351 watt (110 or 220 V ac auto-sensing) Size: v Height: 43 mm (1.75 inches, 1 U) v Depth: 559 mm (22 inches) v Width: 440 mm (17.32 inches) v Maximum weight: 12.7 kg (28 lb) depending on your configuration Integrated functions: v Two Broadcom NetXtreme™ GB Ethernet controllers on the system board with Wake on LAN® support v Serial port v Four USB ports (two on front and two on rear of server) v Systems-management port if an optional Remote Supervisor Adapter II SlimLine is installed Hard disk controllers: v Serial ATA (SATA) controller (simple-swap SATA models) v Serial-attached SCSI (SAS) controller with integrated RAID (hot-swap SAS/SATA models) that supports RAID levels 0, 1, 1E Environment: v Air temperature: - Server on: 10° to 35°C (50.0° to 95.0°F); altitude: 0 to 914.4 m (3000 ft) - Server on: 10° to 32°C (50.0° to 89.6°F); altitude: 914.4 m (3000 ft) to 2133.6 m (7000 ft) - Server off: 10° to 43°C (50.0° to 109.4°F); maximum altitude: 2133.6 m (7000 ft) - Shipping: -40° to 60°C (-40° to 140°F); maximum altitude: 2133.6 m (7000 ft) v Humidity: - Server on: 8% to 80% - Server off: 8% to 80% Acoustical noise emissions: v Sound power, idling: 6.5 bel maximum v Sound power, operating: 6.5 bel maximum Heat output: Approximate heat output in British thermal units (Btu) per hour: v Minimum configuration: 341 Btu per hour (100 watts) v Maximum configuration: 1024 Btu per hour (300 watts) Electrical input: v Sine-wave input (50 - 60 Hz) required v Input voltage low range: - Minimum: 100 V ac - Maximum: 127 V ac v Input voltage high range: - Minimum: 200 V ac - Maximum: 240 V ac v Approximate input kilovolt-amperes (kVA): - Minimum: 0.102 kVA - Maximum: 0.55 kVA Notes: 1. Power consumption and heat output vary depending on the number and type of optional features that are installed and the power-management optional features that are in use. 2. These levels were measured in controlled acoustical environments according to the procedures that are specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average stated values because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. 3. There is no keyboard connector or mouse connector on the server. You can connect a USB keyboard and USB mouse to the server by using the USB connectors. Chapter 1. Introduction 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Table
1.
Features
and
specifications
Microprocessor:
One
Intel
®
LGA
775
single
core,
dual
core,
or
quad
core,
depending
on
the
server
model:
v
Single
core:
Celeron
440
or
later
v
Dual
core:
Core
2
Duo
E4600
or
Xeon
E3110,
or
later
v
Quad
core:
Xeon
3300
series
See
eserver/serverproven/compat/us/
for
a
list
of
supported
microprocessors.
Notes:
1.
Use
the
Configuration/Setup
Utility
program
to
determine
the
size
of
the
L2
cache,
type
and
speed
of
the
microprocessor,
and
speed
of
the
front-side
bus.
2.
Intel
Virtualization
Technology
(VT)
is
not
available
on
the
Celeron
440
or
the
Core
2
Duo
E4600;
however,
these
microprocessors
can
run
paravirtualization.
Memory:
v
Minimum:
Two
512
MB
DIMMs
v
Maximum:
8
GB
v
Type:
PC2-5300,
667
MHz,
ECC,
DDR
II
unbuffered
SDRAM
DIMMs
v
Slots:
Four
dual
inline
v
Supports
512
MB,
1
GB,
and
2
GB
DIMMs
Drives:
Ultrabay
Enhanced:
CD
or
CD/DVD
Expansion
bays:
One
of
the
following
configurations:
v
Two
3.5-inch
slim-high
bays
for
hard
disk
drives.
–
Hot-swap
models:
Supports
maximum
of
two
serial-attached
SCSI
(SAS)
drives
or
two
serial
ATA
(SATA)
drives.
–
Simple-swap
models:
Supports
maximum
of
two
SATA
drives
v
Four
2.5-inch
small
form-factor
(SFF)
hot-swap
bays
for
hard
disk
drives.
Supports
a
maximum
of
four
2.5-inch
SAS
drives.
Expansion
slots:
Two
PCI
Express
x8
slots,
one
low-profile
and
one
3/4-length
full
height.
Low-profile
slot
supports
x4
electrical.
Video
controller:
v
ATI
ES1000
video
on
system
board
v
16
MB
DDR
II
video
memory
Power
supply:
351
watt
(110
or
220
V
ac
auto-sensing)
Size:
v
Height:
43
mm
(1.75
inches,
1
U)
v
Depth:
559
mm
(22
inches)
v
Width:
440
mm
(17.32
inches)
v
Maximum
weight:
12.7
kg
(28
lb)
depending
on
your
configuration
Integrated
functions:
v
Two
Broadcom
NetXtreme
™
GB
Ethernet
controllers
on
the
system
board
with
Wake
on
LAN
®
support
v
Serial
port
v
Four
USB
ports
(two
on
front
and
two
on
rear
of
server)
v
Systems-management
port
if
an
optional
Remote
Supervisor
Adapter
II
SlimLine
is
installed
Hard
disk
controllers:
v
Serial
ATA
(SATA)
controller
(simple-swap
SATA
models)
v
Serial-attached
SCSI
(SAS)
controller
with
integrated
RAID
(hot-swap
SAS/SATA
models)
that
supports
RAID
levels
0,
1,
1E
Environment:
v
Air
temperature:
–
Server
on:
10°
to
35°C
(50.0°
to
95.0°F);
altitude:
0
to
914.4
m
(3000
ft)
–
Server
on:
10°
to
32°C
(50.0°
to
89.6°F);
altitude:
914.4
m
(3000
ft)
to
2133.6
m
(7000
ft)
–
Server
off:
10°
to
43°C
(50.0°
to
109.4°F);
maximum
altitude:
2133.6
m
(7000
ft)
–
Shipping:
-40°
to
60°C
(-40°
to
140°F);
maximum
altitude:
2133.6
m
(7000
ft)
v
Humidity:
–
Server
on:
8%
to
80%
–
Server
off:
8%
to
80%
Acoustical
noise
emissions:
v
Sound
power,
idling:
6.5
bel
maximum
v
Sound
power,
operating:
6.5
bel
maximum
Heat
output:
Approximate
heat
output
in
British
thermal
units
(Btu)
per
hour:
v
Minimum
configuration:
341
Btu
per
hour
(100
watts)
v
Maximum
configuration:
1024
Btu
per
hour
(300
watts)
Electrical
input:
v
Sine-wave
input
(50
-
60
Hz)
required
v
Input
voltage
low
range:
–
Minimum:
100
V
ac
–
Maximum:
127
V
ac
v
Input
voltage
high
range:
–
Minimum:
200
V
ac
–
Maximum:
240
V
ac
v
Approximate
input
kilovolt-amperes
(kVA):
–
Minimum:
0.102
kVA
–
Maximum:
0.55
kVA
Notes:
1.
Power
consumption
and
heat
output
vary
depending
on
the
number
and
type
of
optional
features
that
are
installed
and
the
power-management
optional
features
that
are
in
use.
2.
These
levels
were
measured
in
controlled
acoustical
environments
according
to
the
procedures
that
are
specified
by
the
American
National
Standards
Institute
(ANSI)
S12.10
and
ISO
7779
and
are
reported
in
accordance
with
ISO
9296.
Actual
sound-pressure
levels
in
a
given
location
might
exceed
the
average
stated
values
because
of
room
reflections
and
other
nearby
noise
sources.
The
declared
sound-power
levels
indicate
an
upper
limit,
below
which
a
large
number
of
computers
will
operate.
3.
There
is
no
keyboard
connector
or
mouse
connector
on
the
server.
You
can
connect
a
USB
keyboard
and
USB
mouse
to
the
server
by
using
the
USB
connectors.
Chapter
1.
Introduction
5