IBM 419452u Installation Guide - Page 46
Using, Configuration/Setup, Utility, program, Logic, Configuration
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
c. View the overview to learn about ServerGuide features. d. View the readme file to review installation tips about your operating system and adapter. e. Start the setup and hardware configuration programs. f. Start the operating-system installation. You will need your operating-system CD. Using the Configuration/Setup Utility program The Configuration/Setup Utility program is part of the BIOS. You can use it to perform the following tasks: v View configuration information v View and change assignments for devices and I/O ports v Set the date and time v Set and change passwords v Set and change the startup characteristics of the server and the order of startup devices (startup-drive sequence) v Set and change settings for advanced hardware features v View and clear the event and error logs v Change interrupt request (IRQ) settings v Resolve configuration conflicts To start the Configuration/Setup Utility program, complete the following steps: 1. Turn on the server. 2. When the message Press F1 for Configuration/Setup is displayed, press F1. If an administrator password has been set, you must type the administrator password to access the full Configuration/Setup Utility menu. 3. Follow the instructions on the screen. See the User's Guide that is on the IBM System x Documentation CD for more information about using the Configuration/Setup Utility program. Using the LSI Logic Configuration Utility program Use the LSI Logic Configuration Utility program to configure hot-swap hard disk drives that are connected to the SAS/SATA controller. Important: v If the server is a simple-swap SATA model that contains a SATA RAID back plate, you can use the LSI Logic Configuration Utility program to configure the simple-swap SATA hard disk drives. v If you install an optional RAID controller in the server, such as the ServeRAID-MR10i controller, use the configuration software that comes with the adapter to configure the hard disk drives. To start the LSI Logic Configuration Utility program, complete the following steps: 1. Turn on the server. 2. When the prompt Press CTRL-C to start LSI Logic Configuration Utility... is displayed, press Ctrl+C. If you have set an administrator password, you are prompted to type the password. 32 IBM System x3250 M2 Types 4190 and 4194: Installation Guide