IBM 419452u Installation Guide - Page 38
Completing, installation
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
8. Press the Remote Supervisor Adapter II SlimLine firmly into the connector and make sure that all tabs on both mounting brackets secure the adapter in place. Attention: Incomplete insertion might cause damage to the server or the adapter. 9. If a three-quarter-length adapter is installed in expansion slot 1 on the riser-card assembly, remove it. You can replace it with a half-length adapter if you choose to do so. 10. Reinstall the riser-card assembly. Make sure that the riser-card assembly is fully seated in the riser-card connectors on the system board. Power cable PCI-X slot 11. If you have installed an optional PCI-X riser-card assembly, reconnect the riser-card power cable to the riser-card assembly. See the documentation that comes with the Remote Supervisor Adapter II SlimLine for information about installing the firmware and configuring the adapter. Create a backup copy of the configuration so that if you have to replace the adapter in the future you can restore the configuration. If you have other devices to install, do so now. Otherwise, go to "Completing the installation." Completing the installation To complete the installation, complete the following steps: 1. Install the cover. See "Installing the cover" on page 25 for more information. 2. Install the server in the rack cabinet. See the Rack Installation Instructions that come with the server for detailed information about how to install the server in a rack cabinet. Attention: v Install the server only in a rack cabinet that has perforated doors. v Do not leave open space above or below an installed server in your rack cabinet. To help prevent damage to server components, always install a filler panel to cover the open space and to help ensure proper air circulation. See the documentation that comes with the rack cabinet for more information. 3. Connect the cables and power cords. See "Connecting the cables" on page 25 for more information. 24 IBM System x3250 M2 Types 4190 and 4194: Installation Guide