IBM 419452u Installation Guide - Page 37
static-protective
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Mounting bracket retention latch Mounting bracket Remote Supervisor Adapter II SlimLine Mounting bracket 1. Read the safety information that begins on page v and "Installation guidelines" on page 11. 2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables. Remove the cover. Power cable PCI-X slot 3. If you have installed an optional PCI-X riser-card assembly, disconnect the riser-card power cable from the riser-card assembly. 4. Grasp the riser-card assembly at the front and rear edges and lift to remove it from the server. Place the riser-card assembly on a flat, static-protective surface. 5. Put the protective plastic cover that came with the adapter on the Remote Supervisor Adapter II SlimLine. 6. Turn the Remote Supervisor Adapter II SlimLine so that the keys on the connector align correctly with the connector on the system board. 7. At a downward angle, insert the free end of the adapter under the tab on the mounting bracket, aligning the holes in the adapter with the posts on the mounting bracket. Rotate the rear of the adapter into the rear mounting bracket, aligning the holes in the adapter with the posts on the rear mounting bracket. Chapter 2. Installing optional devices 23