Icom ID-52A About The Dv Gateway Function - Page 10

When connecting your device to the Internet using a mobile router, → When using a Windows device

Get Icom ID-52A PDF manuals and user guides View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

1 Preparation ■■Setting up a network DDWhen connecting your device to the Internet using a mobile router The following items are required to use the DV Gateway function. •• An Internet connection with an IPv4 Global IP address •• A static* local IP address set to your Windows or Android device •• Port forwarding of port 40000 Needs a Global IP address. * A static IP address to the Windows or Android device is recommended. Forward port number 40000. Internet Needs a Global IP address. Forward port number 40000. 1. A Global IP address A static or dynamic IPv4 Global IP address assigned to the router is needed. LLYour router may not have a Global IP address, depending on your Internet service provider. Ask your Internet service provider about the Global IP address setting. 2. Setting a static local IP address to your device When using a mobile router, you need to set a static local IP address to the Windows or Android device. LLUsable IP address differs depending on your router. Ask the router's manufacturer for details. LLDo not set the same IP address to two or more devices that are connected to the same router. LLAsk your Windows or Android device's manufacturer about the setting details. 3. Port forwarding When using a mobile router, enable communication with the Internet, as described below. zz Forward the port number 40000 to your cellular device. zz "UDP" should be used as the port protocol. zz Set a static local IP address in Procedure 2 (2. Setting a static local IP address to your device) as a destination port. LLAsk the mobile router's manufacturer about how to forward the port. LLOnly one Windows or Android device connected to the mobile router can use the DV Gateway function at the same time. LLDepending on the router settings, you must configure the IP filter settings. Check the router's manual on how to configure the settings. → When using a Windows device, go to "Setting up the RS-MS3W." (p. 11) → When using an Android device, go to "Setting up the RS-MS3A." (p. 12) 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
1
Preparation
10
■
Setting up a network
D
When connecting your device to the Internet using a mobile router
The following items are required to use the DV Gateway function.
•
An Internet connection with an IPv4 Global IP address
•
A static* local IP address set to your Windows or Android device
•
Port forwarding of port 40000
Internet
Forward port number
40000.
Forward port number
40000.
* A static IP address to the
Windows or Android device is
recommended.
Needs a Global IP address.
Needs a Global IP address.
1. A Global IP address
A static or dynamic IPv4 Global IP address assigned to the router is needed.
L
Your router may not have a Global IP address, depending on your Internet service provider.
Ask your Internet service provider about the Global IP address setting.
2. Setting a static local IP address to your device
When using a mobile router, you need to set a static local IP address to the Windows or Android device.
L
Usable IP address differs depending on your router. Ask the router’s manufacturer for details.
L
Do not set the same IP address to two or more devices that are connected to the same router.
L
Ask your Windows or Android device’s manufacturer about the setting details.
3. Port forwarding
When using a mobile router, enable communication with the Internet, as described below.
z
Forward the port number 40000 to your cellular device.
z
“UDP” should be used as the port protocol.
z
Set a static local IP address in Procedure 2 (2. Setting a static local IP address to your device) as a destination
port.
L
Ask the mobile router’s manufacturer about how to forward the port.
L
Only one Windows or Android device connected to the mobile router can use the DV Gateway function at the same time.
L
Depending on the router settings, you must configure the IP filter settings. Check the router’s manual on how to configure
the settings.
→ When using a Windows device, go to “Setting up the RS-MS3W.” (p. 11)
→ When using an Android device, go to “Setting up the RS-MS3A.” (p. 12)