Icom ID-52A About The Dv Gateway Function - Page 23
Set the Access Point using the DR function, Set TO and transmit
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 Access Point mode operation ■■Making a Gateway call through the Access point transceiver DDWhen using the DR function (Continued) 2. Set the Access Point using the DR function Set the Access Point registered in Procedure 1 (1. Register the Access Point information to the Repeater List) to "FROM." 3. Set "TO" and transmit 1. Set "TO" destination. (Example: Hamacho 430) LLYou can select the "Local CQ," but cannot make a call. 2. Hold down [PTT] to transmit. 3. Release [PTT] to receive. LLIf you cannot receive a reply, see page 29 to read the tips to solve the problem. 23
4
Access Point mode operation
23
■
Making a Gateway call through the Access point transceiver
D
When using the DR function (Continued)
2. Set the Access Point using the DR function
Set the Access Point registered in Procedure 1
(1. Register the Access Point information to the
Repeater List) to “FROM.”
3. Set “TO” and transmit
1. Set “TO” destination.
(Example: Hamacho 430)
L
You can select the “Local CQ,” but cannot make a
call.
2.
Hold down [PTT] to transmit.
3. Release [PTT] to receive.
L
If you cannot receive a reply, see page 29 to read
the tips to solve the problem.