Icom ID-52A About The Dv Gateway Function - Page 22
When using the DR function, Register the Access Point information to the Repeater List, Repeater List
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 Access Point mode operation ■■Making a Gateway call through the Access point transceiver DDWhen using the DR function NOTE: If you have imported the Repeater List, you have to register the Access Point information again because the Repeater List is overwritten. In this document, the ID-51A (PLUS2)/ID-51E (PLUS2) is used as a Remote D-STAR transceiver as an example. 1. Register the Access Point information to the Repeater List LLRegister the Access Point information in the MENU screen. (MENU > DV Memory > Repeater List) 1. Select a group you want to add your Access Point information. * 2. After selecting a group, open the Repeater List Edit screen. (QUICK MENU > Add) 3. Set "DV Repeater" to "TYPE." * LL"DV Repeater" is used for Repeater operation in the DV mode. 4. Enter your favorite name into "NAME" and "SUB NAME." (Example: MY AP) * For only the ID-31A/E PLUS, ID-51A/E (PLUS), or ID-51A/E (PLUS2) 5. Set the Access Point transceiver's call sign to "CALL SIGN." (Example: JL3YRP) LLAfter setting "CALL SIGN," "GW CALL SIGN" is automatically set. 6. Set "YES" to "USE (FROM)." 7. Set the Access Point transceiver's operating frequency to "FREQUENCY." (Example: 430.850) 8. Set "DUP" to "DUP-." 9. Set "0.000.00" to "OFFSET FREQ." 10. Select "" and write the Access Point information. 22