Icom ID-52A About The Dv Gateway Function - Page 29

5 Troubleshooting ■■Troubleshooting for the Access Point mode operation MESSAGE POSSIBLE CAUSE After your call, the repeater •• The destination repeater is in replies 'RPT?' and the access use. repeater's call sign. SOLUTION •• Wait for a while, and try again. REFERENCE - "L" appears on the LCD. •• While receiving through the Internet, some packets may be lost due to network error (poor data throughput performance). •• Wait for a while, and try - again. LLWhen the transceiver receives corrupted data, and misidentifies it is as Packet Loss, "L" is displayed. "DV" and "FM" icons alternately blink. •• While in the DV mode, an FM •• Use a different operating signal is received. frequency until there are no FM signals on the original frequency. Advanced manual* You can transmit, but cannot receive from the destination repeater. •• Global IP address is not used. •• Check the Internet connection pp. 6 ~ 10 •• The router or mobile and use a Global IP address. router's port is not correctly •• Forward the router or mobile pp. 6 ~ 10 forwarded. router's correct port. •• The communication is •• Check your firewall settings. p. 11 interfered with the firewall setting. * See the ID-31A PLUS/ID-31E PLUS Advanced manual Section 4, ID-51A (PLUS2)/ID-51E (PLUS2) Advanced manual Section 9, or ID-52A/ID-52E Advanced manual Section 5. Nov. 2020 29 A7311-4EX-2