Icom ID-52A About The Dv Gateway Function - Page 25

Set the frequency offset., Set the destination station call sign to UR., Hold down [PTT] to transmit.

Get Icom ID-52A PDF manuals and user guides View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

4 Access Point mode operation ■■Making a Gateway call through the Access point transceiver DDWhen using the DR function (Continued) 5. Set the frequency offset. 1. Push [MENU]. 2. Select "DUP/TONE...." 3. Select "Offset Freq." 4. Set "0.000.00." 5. Push [MENU]. •• Returns to the standby screen. 6. Set the destination station call sign to "UR." 1. Hold down [CS] for 1 second to enter the Operating Call Sign Select mode. 2. Select "UR." 3. Set the destination repeater or destination station's call sign. LLIn the Access Point mode, you can select the "CQCQCQ" but cannot make a call. 4. Push [MENU]. •• Returns to the standby screen. 7. Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. 2. Release [PTT] to receive. LLIf you cannot receive a reply, see page 29 to read the tips to solve the problem. TIP: When the settings are saved into a memory channel, you can quickly select them. Read the Remote D-STAR transceiver's instruction manual for details. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
4
Access Point mode operation
25
■
Making a Gateway call through the Access point transceiver
D
When using the DR function (Continued)
5. Set the frequency offset.
1. Push [MENU].
2. Select “DUP/TONE
....
”
3. Select “Offset Freq.”
4. Set “0.000.00.”
5. Push [MENU].
•
Returns to the standby screen.
6. Set the destination station call sign to “UR.”
1.
Hold down [CS] for 1 second to enter the
Operating Call Sign Select mode.
2. Select “UR.”
3.
Set the destination repeater or destination
station’s call sign.
L
In the Access Point mode, you can select the
“CQCQCQ” but cannot make a call.
4. Push [MENU].
•
Returns to the standby screen.
7. Hold down [PTT] to transmit.
1.
Hold down [PTT] to transmit.
2. Release [PTT] to receive.
L
If you cannot receive a reply, see page 29 to read the
tips to solve the problem.
TIP:
When the settings are saved into a memory
channel, you can quickly select them. Read the
Remote D-STAR transceiver’s instruction manual for
details.