Insignia NS-42L780A12 User Manual (English) - Page 16
Using DVI same as HDMI but requires a sound, connection, Using component video better
View all Insignia NS-42L780A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
NS-42L780A12/NS-46L780A12/NS-55L780A12 Insignia 42"/46"/55" LCD HDTV, 1080p Using DVI (same as HDMI but requires a sound connection) Note A DVI device must be connected to the HDMI 1 jack. If you connect a DVI device to another HDMI jack, you will not hear audio. To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect an HDMI-DVI adapter (not included) to one end of an HDMI cable (not included). 4 Connect the HDMI-DVI adapter to the HDMI 1 jack on the back of your TV and to the DVI OUT jack on the cable or satellite box. Cable or satellite box Using component video (better) To connect a cable or satellite box using component video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect a component video cable (included) to the Y-VIDEO, PB, and PR jacks on the side of your TV and the component video out jacks on the cable or satellite box. Cable or satellite box 3.5 mm audio cable HDMI cable with HDMI-DVI adapter Audio cable Component video cable Back of TV 5 Connect a 3.5 mm audio cable (not included) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jack on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Go through the setup wizard on page 21. Side of TV 4 Connect an audio cable (included) to the L and R audio jacks on the side of your TV and to the audio out jack on the cable or satellite TV box. Note When you connect the audio using the L and R audio jacks, the audio output is analog. You can connect the video to the component video jacks and connect the audio to the digital audio jack to get digital audio output. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Go through the setup wizard on page 21. 12 www.insigniaproducts.com