Intel BLKDH61WWB3 Product Specification - Page 51
BIOS Configuration Jumper Block
View all Intel BLKDH61WWB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Technical Reference 2.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program's mode. Table 25 describes the jumper settings for the three modes: normal, configure, and recovery. Figure 13. Location of the Jumper Block 51
Technical Reference
51
2.3
BIOS Configuration Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting.
Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block.
The 3-pin jumper block determines
the BIOS Setup program’s mode.
Table 25 describes the jumper settings for the three
modes:
normal, configure, and recovery.
Figure 13.
Location of the Jumper Block