Intel BLKDX58OG Product Specification - Page 24
Audio Connectors and Headers
View all Intel BLKDX58OG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Intel Desktop Board DX58OG Technical Product Specification 1.9.2 Audio Connectors and Headers The board contains audio connectors on the back panel and audio headers on the component side of the board. The front panel audio header provides mic in and line out signals for the front panel. Microphone bias is supported for both the front and back panel microphone connectors. The front/back panel audio connectors are configurable through the audio device drivers. The available configurable back panel audio ports are shown in Figure 4. Item A B C Description Line in Line out Mic in Figure 4. Back Panel Audio Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output. For information about The location of the front panel audio header The signal names of the front panel audio header The back panel audio connectors Refer to Figure 11, page 43 Table 12, page 45 Section Error! Reference source not found., page Error! Bookmark not defined. 24