Intel H2000WP Technical Product Specification - Page 19
Power Sub-System
View all Intel H2000WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Intel® Server Chassis H2000 Family TPS Power Sub-System 3. Power Sub-System The system supports AC 1+1 hot swap power supply module and two power distribution board which can support 2U rack high density server system. Two different power supply units are supported: 1200W and 1600W. The single power supply module has Platinum level energy efficiency, demonstrating climate saver with silver rating. 3.1 Mechanical Overview The power supply module has a simple retention mechanism to retain the module self once it is inserted. This mechanism shall withstand the specified mechanical shock and vibration requirements. The power distribution board will be fixed in the chassis with screws. This specification defines a 1+1 hot swap redundancy power supply that supports 2U server system. Using existing power supply module provided by vendor with updated PMBus* and custommade power connector board to support four computing nodes. The power supply shall have two outputs: 12V and 12VSB. The input shall be auto ranging and power factor corrected. The PMBus* features included in this specification are requirements for AC silver rated box power supply for use in server systems based on Intel® Server Chassis H2000 Family. This specification is based on the PMBus* Specifications part I and II, revision 1.1. 3.1.1 AC Power Supply Unit Dimension Overview The casing dimension is W 73.5mm x L 265.0mm x H 39/40mm. The power supply contains a single 40mm fan. The power supply has a card edge output that interfaces with a 2x25 card edge connector in the system. The AC plugs directly into the external face of the power supply. Figure 8. AC Power Supply Unit Dimension Overview 3.1.2 AC Power Supply Unit General Data Below is general specification data for AC Power Supply Unit. Revision 1.0 9 Intel order number: G59059-001