Intel H2000WP Technical Product Specification - Page 45

x9 Pin Power Input Connector

Page 45 highlights

Intel® Server Chassis H2000 Family TPS Hard Disk Drive Support Figure 24. Hard Drive Carrier LED General HDD LED functionality is displayed below: Table 34. Hard Drive Carrier Status LED Functions Amber Off Solid On Blink No access and no fault Hard Drive Fault has occurred Raid rebuild in progress (1hz) Identify (2hz) Table 35. Hard Drive Carrier Activity LED Functions Green Condition Power on with no drive activity. Power on with drive activity. Power on and drive spun down. Power on and drive spinning up. Drive Type SAS SATA SAS SATA SAS SATA SAS SATA Behavior LED stays on LED stays off LED blinks off when processing a command LED blinks off when processing a command LED stays off LED stays off LED blinks LED stays off 5.3.6 Backplane Connector Definition The backplanes include several different connectors. This section defines the purpose and pin out associated with each. 1. 2x9 Pin Power Input Connector The backplane is powered by +12V and +12VSTB from PDB of CRPS. The input power is distributed by backplane to all four nodes. Table 36. Backplane Input Power Connector Pin-out Pin Signal Description Pin Signal Description 2 P12V 1 GND 4 P12V 3 GND 6 P12V 5 GND 8 P12V 7 GND 10 P12V 9 GND 12 P12V 11 GND Revision 1.0 35 Intel order number: G59059-001

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

Intel
®
Server Chassis H2000 Family TPS
Hard Disk Drive Support
Revision 1.0
35
Intel order number: G59059-001
Figure 24. Hard Drive Carrier LED
General HDD LED functionality is displayed below:
Table 34. Hard Drive Carrier Status LED Functions
Table 35. Hard Drive Carrier Activity LED Functions
5.3.6
Backplane Connector Definition
The backplanes include several different connectors. This section defines the purpose and pin
out associated with each.
1. 2x9 Pin Power Input Connector
The backplane is powered by +12V and +12V
STB
from PDB of CRPS. The input power is
distributed by backplane to all four nodes.
Table 36. Backplane Input Power Connector Pin-out
Pin
Signal Description
Pin
Signal Description
2
P12V
1
GND
4
P12V
3
GND
6
P12V
5
GND
8
P12V
7
GND
10
P12V
9
GND
12
P12V
11
GND
Amber
Off
No access and no fault
Solid On
Hard Drive Fault has occurred
Blink
Raid rebuild in progress (1hz) Identify (2hz)
Green
Condition
Drive Type
Behavior
Power on with no drive activity.
SAS
LED stays on
SATA
LED stays off
Power on with drive activity.
SAS
LED blinks off when processing a command
SATA
LED blinks off when processing a command
Power on and drive spun down.
SAS
LED stays off
SATA
LED stays off
Power on and drive spinning up.
SAS
LED blinks
SATA
LED stays off