Intel H2000WP Technical Product Specification - Page 20
AC input connector, AC Power Cord Specification Requirements, Power Supply Unit DC Output Connector
View all Intel H2000WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Power Sub-System Intel® Server Chassis H2000 Family TPS Table 6. Specification Data for AC Power Supply Unit Wattage Voltage Heat Dissipation Maximum Inrush Current 80 Plus rating Climate Saver (CS) rating 1200W/1600W (Energy Smart) 90 - 264 VAC, auto-ranging, 47 Hz-63 Hz 2560 BTU/hr Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 65 A per power supply for 5 ms Platinum Platinum 3.1.3 AC input connector The power supply has an internal IEC320 C14 power inlet. The inlet is rated for a minimum of 10A at 250VAC. 3.1.4 AC Power Cord Specification Requirements The AC power cord used must meet the following specification requirements: Table 7. AC power cord specification Cable Type Wire Size Temperature Rating Amperage Rating Cable Type SJT 16 AWG 105º C 13A SJT 3.1.5 Power Supply Unit DC Output Connector The DC output connector pin-out is defined as follows: Table 8. DC Output Power Connector PSU Output Connector A1 GND B1 GND A2 GND B2 GND A3 GND B3 GND A4 GND B4 GND A5 GND B5 GND A6 GND B6 GND A7 GND B7 GND A8 GND B8 GND A9 GND B9 GND A10 +12V B10 +12V A11 +12V B11 +12V A12 +12V B12 +12V A13 +12V B13 +12V A14 +12V B14 +12V A15 +12V B15 +12V A16 +12V B16 +12V A17 +12V B17 +12V 10 Revision 1.0 Intel order number: G59059-001