Intel P4000RP Technical Product Specification - Page 164
Clear System Event Log
View all Intel P4000RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
BIOS Setup Interface Intel® Server Board S1200V3RP Note: This Power Restore Delay option applies only to powering on when AC is applied. It has no effect on powering the system up using the Power Button on the Front Panel. A DC power on using the Power Button is not delayed. The purpose of this delay is to avoid having all systems draw "startup surge" power at the same time. Different systems or racks of systems can be set to different delay times to spread out the startup power draws. Alternatively, all systems can be set to Automatic, and then each system will wait for a random period before powering up. Back to [Server Management Screen] - [Screen Map] 6. Power Restore Delay Value Option Values: [Entry Field 25 - 300, 25 is default] Help Text: Fixed time period 25-300 seconds for Power Restore Delay. Comments: When the power restore policy is Power On or Last State, and the Power Restore Delay selection is Fixed, this field allows for specifying how long in seconds that fixed delay will be. When the Power Restore Delay is Disabled or Auto, this field will be grayed out and unavailable. The Power Restore Delay Value setting is maintained by BIOS. This setting does not take effect until a reboot is done. Early in POST, the Power Restore Policy is read from the BMC, and if the policy is Power On or Last State, the delay settings are sent to the BMC. When the Power Restore Delay setting is Fixed, this delay value is used to provide the length of the delay. Back to [Server Management Screen] - [Screen Map] 7. Clear System Event Log Option Values: Enabled Disabled Help Text: If enabled, clears the System Event Log. All current entries will be lost. Note: This option is reset to [Disabled] after a reboot. Comments: This option sends a message to the BMC to request it to clear the System Event Log. The log will be cleared, and then the "Clear" action itself will be logged as an event. This gives the user a time/date for when the log was cleared. Back to [Server Management Screen] - [Screen Map] 152 Revision 1.0